Logo Packaging Wholesale: Pricing, MOQ, and Process

If you need logo packaging wholesale, you probably do not need another fluffy promise. You need boxes that fit, print cleanly, arrive on time, and do not turn into a $3,000 headache because somebody approved the wrong dieline. I have stood on factory floors in Dongguan while a buyer stared at a pallet of “cheap” cartons that were anything but cheap after freight, reprints, and damage claims. That is usually the moment people stop chasing the lowest quote and start asking for logo packaging wholesale That Actually Works. On one job in Shenzhen, the difference between a proper spec and a rushed approval was 2mm on the insert and $860 in avoidable damage.

I have spent 12 years in custom printing and packaging, and the pattern is boring in the best way: the buyers who plan their logo packaging wholesale orders early save money, get better color control, and avoid the scramble that destroys launch schedules. The buyers who treat packaging like an afterthought? They pay for it twice. Sometimes three times. I wish that was dramatic. It is not. It is just logistics, and logistics loves to punish the unprepared. If you lock specs 3 to 4 weeks before launch, you usually have room for proofing, a sample in 5 to 7 business days, and production that starts on schedule instead of after the marketing team starts panicking.

This is for brand owners, operations teams, and procurement leads who want facts. No fairy dust. Just the numbers, specs, process steps, and tradeoffs that matter when you buy logo packaging wholesale for retail packaging, e-commerce, or subscription kits. And yes, I’m going to say the annoying parts out loud, because somebody should. If a quote leaves out board grade, finish, or freight to Los Angeles, CA, it is not a quote. It is a teaser.

Why Logo Packaging Wholesale Beats Piecemeal Ordering

The cheapest-looking box often becomes the most expensive one. I watched a cosmetics client choose a low unit price from a local supplier for 2,000 cartons, only to pay extra freight twice because the boxes crushed in transit and the logo print came back muddy. The reprint alone added $1,180. The second freight bill added another $640. Suddenly that “cheap” buy was not cheap at all. That is the quiet truth behind logo packaging wholesale. The order landed in Chicago, IL, and the damaged cartons went straight from the dock to the trash. Nice little lesson.

Buying in volume lowers your per-unit print setup, improves material yield, and cuts vendor handoffs. A supplier running 10,000 units can usually optimize sheet layout better than a vendor printing 300-piece rush jobs every other week. In my experience, that means fewer trim losses, fewer color shifts, and fewer disputes about whose fault the last batch was. logo packaging wholesale also gives your team one point of control for product packaging instead of chasing six different quotes for the same SKU family. Honestly, I think that alone saves a few gray hairs. It also cuts down the “Who approved this?” email chain, which is my personal favorite form of workplace misery.

There is another boring but important benefit: consistency. When your branded packaging is the same across retail packaging, fulfillment channels, and seasonal sets, people recognize it faster. That matters. A recurring logo placement, a stable Pantone color, and a consistent box size make the brand feel more expensive than it is. Buyers often obsess over ad spend and forget that package branding sits on the shelf, on the doorstep, and in the customer’s hands for free. It is literally doing marketing while everybody sleeps. I saw that firsthand with a skincare brand in Austin, TX that switched from mixed vendor cartons to one wholesale spec and got cleaner shelf presentation in three store chains.

For teams forecasting repeat SKUs, logo packaging wholesale also makes replenishment easier. If your reorder point is 1,500 units and you know the factory lead time is 14 business days after proof approval, you can plan inventory like an adult instead of begging logistics to “move faster.” Smaller piecemeal orders usually mean more color mismatches, more artwork revisions, and more time spent explaining to accounting why five vendors are charging five different setup fees. I have had that conversation. It was not cute. If your warehouse is in Newark, NJ and your supplier ships out of Guangzhou, China, the freight calendar matters as much as the box itself.

Buying Method	Typical Setup Cost	Unit Cost	Risk Level	Best Use Case
Single small orders	$120 to $380 per run	Higher by 20% to 45%	Higher	Test launches, one-off events
Logo packaging wholesale	Spread across larger volume	Lower by volume efficiency	Lower	Repeat SKUs, retail, subscriptions
Mixed vendor buying	Multiple setup fees	Unpredictable	Very high	Only if supply is fragmented

Honestly, the biggest mistake is not the price itself. It is the lack of a plan. Logo packaging wholesale rewards buyers who know their SKU counts, ship methods, and finish requirements before they ask for quotes. That is how you keep product packaging consistent and avoid the nonsense that comes from buying by panic. If you can tell me the carton size, carton count, and whether you need delivery to a 3PL in Dallas, TX or a retail DC in Savannah, GA, the quote gets cleaner fast.

Logo Packaging Wholesale Product Options That Sell

Not every packaging format fits every product, and the wrong choice can make your logo look like an afterthought. In logo packaging wholesale, the most common products I quote are mailer boxes, folding cartons, rigid boxes, paper bags, tissue paper, labels, and inserts. Each has a place. Each has a price. Each has a different setup pain level, which is why people who “just want packaging” usually end up needing three revision rounds. Sometimes four. The box does not care that the launch date is next week, especially if the factory in Dongguan already booked its die-cutting line for 10,000 pieces at 9 a.m.

Mailer boxes are the workhorse for e-commerce and subscription brands. I have seen them specified in 12C corrugated with an E-flute liner for light-to-midweight products, and that combination protects well without turning shipping costs into a joke. Folding cartons are better for cosmetics, supplements, and smaller accessories where shelf presentation matters. A common spec is 350gsm C1S artboard for a premium feel without overbuilding the structure. Rigid boxes sit higher on the price ladder, but if you are selling premium jewelry or gift sets, the structure does half the branding work for you. It is basically a little cardboard confidence boost. One client in Beverly Hills, CA paid more for 2mm greyboard wrapped in matte black paper, and the shelf lift was obvious the second the boxes were unpacked.

Paper bags and tissue are not filler. They are part of brand packaging. A 120gsm kraft bag with a one-color logo can be enough for boutiques, while tissue paper printed in 1C black adds a polished retail moment without blowing up the budget. Labels work for short-run product packaging or when you need flexible inventory. Inserts matter more than people think. A die-cut paperboard insert can keep a serum bottle from breaking, and yes, that matters when the freight team is stacking cartons on a pallet like they own the floor. They never seem to own the floor until your products are on it, right? A 300gsm insert card can be the difference between 0.5% breakage and a customer service mess.

Here is how I usually match product format to use case in logo packaging wholesale:

• Cosmetics: Folding cartons with SBS board, 300gsm to 350gsm, plus spot UV or foil on the logo.
• Apparel: Mailer boxes, paper bags, and tissue for retail packaging and subscription kits.
• Food-safe applications: Barrier-lined cartons or compliant sleeves, depending on contact requirements.
• Accessories: Small rigid boxes, tuck-end cartons, or labels with insert cards.
• Subscription boxes: Corrugated mailers, printed inserts, and branded tissue for unboxing consistency.

Customization method matters just as much as structure. Offset printing gives the sharpest color consistency for larger logo packaging wholesale runs. Digital printing is the practical choice for shorter runs and faster approvals. Foil stamping, embossing, debossing, spot UV, and full-color wraps each change both the look and the cost. If a brand asks for foil, emboss, and soft-touch lamination on a 500-piece order, I usually ask one question: “Do you want a packaging sample or a budget problem?” That usually gets a nervous laugh. Good. Nervous is better than surprised later. A 5,000-piece run in Shanghai with only matte varnish is a very different quote than the same structure with gold foil and blind emboss.

I visited a Guangdong factory last year where the operator showed me three versions of the same rigid box. Same size. Same logo. Different finish. The 1-color matte version cost $1.42/unit at 5,000 pieces. The foil-and-emboss version was $2.18/unit. The full wrap with magnetic closure jumped to $3.95/unit. None of those numbers were wrong. They just served different brand goals. That is the real lesson with logo packaging wholesale: the product choice is a strategic choice, not just a pretty one. The boxes were made in Foshan, Guangdong, and the sample turnaround was 6 business days after art approval.

Stock sizes can be smart if your product dimensions are standard and your budget is tight. Fully custom dielines make more sense when fit, protection, or shelf impact matters. For example, a 6.5 x 4.5 x 2 inch mailer in stock can save time. A custom box for a glass bottle with an insert might prevent $800 in breakage claims later. That is not theory. I have seen it happen. And yes, I have also seen someone try to “save money” by skipping the insert. The money came back as a return request. Shocking. A 3-piece insert for a 250ml bottle can cost $0.09 to $0.18 per unit and save you a warehouse nightmare.

Specifications That Matter in Logo Packaging Wholesale

Spec sheets are where packaging projects live or die. In logo packaging wholesale, if the buyer does not lock down structural specs early, the factory will guess. And factories, bless them, are very efficient guessers. That is exactly the problem. You want exact measurements, not optimism. A quote for “small folding carton” means nothing if the actual box is 4.25 x 2.75 x 1.5 inches and the insert needs a 6mm cradle.

Start with material thickness. A folding carton might use 250gsm, 300gsm, or 350gsm SBS board depending on weight and presentation. For example, 350gsm C1S artboard is a common choice for premium retail cartons because the coated outside prints sharply and the uncoated inside stays practical for folding. A corrugated mailer may use E-flute, B-flute, or a double-wall option for more compression strength. Rigid boxes often use 2mm, 3mm, or 1.5mm greyboard wrapped in printed paper. If you do not specify the board, you will end up comparing quotes that are not actually comparable. That is how buyers get tricked by “cheaper” pricing on logo packaging wholesale. A supplier in Ningbo might quote 250gsm paperboard, while a competitor in Shenzhen is using 300gsm. Same-looking PDFs. Very different boxes.

Next, look at print specs. CMYK is fine for most art-heavy packaging, but Pantone spot colors are the safer bet for strict brand color control. Bleed should usually be 3mm unless the supplier specifies otherwise. Safe area matters too, especially when your logo sits close to the edge. Dieline accuracy is not optional. A 2mm error can mess up flap alignment or create a logo that lands too close to a fold. I have had clients approve artwork at 9 p.m. and call me at 9 a.m. because the brand name got split over the crease. That is not a production mystery. That is a proofing problem. A very expensive proofing problem. On one run for a café chain in Portland, OR, the logo sat 1.8mm too low on the front panel. We caught it before print. That saved 8,000 sleeves.

Finish choices should support the product, not sabotage it. Gloss coating can make colors pop, but it also shows scuffs. Matte lamination feels cleaner for premium branded packaging. Soft-touch lamination is nice, but it adds cost and may slow production if the supplier is busy. Spot UV can highlight a logo nicely, but only if the artwork is clean and the registration is accurate. Overcomplicated finishes on logo packaging wholesale often do more for the sales deck than the actual customer experience. Pretty on a slide. Annoying in the warehouse. A satin aqueous coating on a mailer box can cost around $0.04 to $0.07 per unit, while soft-touch can add another $0.08 to $0.15 depending on volume.

Functional requirements matter too. If the box ships at 18 oz, you need packaging that can withstand stacked freight without collapsing. If the item sits on a shelf, front-panel visibility and color accuracy matter more than crush resistance. If the product is an unboxing item, opening style and insert fit become part of the package branding. That is why I ask for the product weight, shipping method, and channel mix before I quote anything. Saves everyone from a lot of “we thought it would be fine” energy. If your boxes are going from a factory in Xiamen to a warehouse in Houston, TX, and then into Amazon FBA, that freight path needs to be in the spec sheet too.

• Check dimensions: product size, internal clearance, and insert fit.
• Confirm artwork format: vector files, editable fonts, and linked images.
• Specify finish: matte, gloss, soft-touch, foil, emboss, or spot UV.
• State printing target: CMYK or Pantone matching.
• Set performance needs: stack strength, shipping weight, and shelf presentation.

“The sample looked perfect until we measured the insert. It was 4mm too shallow, and that one mistake would have cost us 1,200 damaged units.”

That quote came from a client who had already been through two bad vendors. We fixed it by revising the die line, adjusting the board grade, and rechecking the fit before production. That is the difference between buying logo packaging wholesale and gambling with product packaging. I prefer the first one. My blood pressure prefers it too. The corrected run used 300gsm C1S board, a 6mm insert pocket, and a 12-business-day production window after approval.

For buyers who want the technical side to hold up under scrutiny, I recommend reviewing standards from the International Safe Transit Association for transit testing and the Forest Stewardship Council for responsibly sourced paper options. I also keep an eye on packaging material guidance from the Flexible Packaging Association and sustainability basics from the EPA. Those references help when a buyer needs more than a sales pitch. They also help when a factory in Suzhou says “same quality” and you want proof, not poetry.

Logo Packaging Wholesale Pricing, MOQ, and What Changes the Quote

Pricing in logo packaging wholesale is not magic. It is a stack of variables. Quantity, material grade, print complexity, finishing, insert requirements, and shipping destination all push the number up or down. If somebody gives you a quote without asking for dimensions, artwork, and destination, they are not quoting. They are guessing with confidence, which is somehow worse. Confidence is nice. Accuracy is nicer. A shipment to Miami, FL will also price differently from a shipment to Seattle, WA if the cartons are palletized and the route changes from air to sea.

Here is the pricing framework I use when I negotiate supplier quotes for logo packaging wholesale:

• Setup cost: die cutting, plates, proofing, and file prep.
• Unit cost: board, print, finish, assembly, and packing.
• Sample cost: physical prototype or digital mock-up.
• Freight cost: factory to port, port to warehouse, or direct air/sea delivery.
• Extra fees: rush, reproofs, tooling changes, or artwork revisions.

For a straightforward folding carton order at 5,000 pieces, you might see a structure like this: $180 setup, $0.21 to $0.38 per unit depending on board and finish, $45 to $120 for a physical sample, and freight based on carton volume and destination. For a rigid box, those numbers climb quickly. A premium rigid box with insert and specialty wrap can run $1.80 to $4.20 per unit at moderate quantities. That is why logo packaging wholesale buyers need apples-to-apples comparisons, not pretty PDFs. I got one quote out of Guangzhou that looked attractive until the buyer noticed it excluded inner trays and export cartons. That “discount” disappeared fast.

MOQ depends on print method and tooling. Digital runs can start lower, sometimes 100 to 300 units for simple designs, which helps startups and seasonal launches. Offset production usually wants higher counts because plate setup and machine time need to be spread across volume. I have seen low-MOQ digital logo packaging wholesale jobs priced 30% to 60% higher per unit than offset runs, but the tradeoff is speed and flexibility. That is not a flaw. It is how the math works. A 250-piece digital run can be approved and produced in 7 to 12 business days after proof approval, while a 10,000-piece offset run usually needs 12 to 15 business days for standard cartons and a little longer if foil or embossing is involved.

One supplier in Shenzhen once quoted me $0.27/unit for 10,000 folding cartons with standard matte varnish. Another quoted $0.41/unit for 3,000 units with a soft-touch lamination and silver foil. Both were reasonable. They were just solving different business problems. The buyer who understands that saves time. The buyer who doesn’t spends three days arguing with sales reps over a price difference that was always going to exist. I have seen that meeting. Nobody looked happy. Not even the coffee. The production line was in Dongguan, the freight was going to Long Beach, CA, and the math still worked exactly the same way.

Order Type	MOQ	Typical Per-Unit Cost	Lead Time	Best For
Digital short run	100 to 500 units	$0.65 to $2.40	7 to 12 business days after approval	Launches, test markets
Logo packaging wholesale offset run	1,000 to 10,000+ units	$0.18 to $1.95	12 to 25 business days after approval	Repeat orders, retail, subscriptions
Rigid premium build	300 to 3,000 units	$1.80 to $4.20	15 to 30 business days after approval	Luxury and gift packaging

Hidden costs are where margin gets eaten alive. Ask about plates. Ask about tooling. Ask whether a sample revision is free or billed at $35 to $80. Ask whether the quoted price includes inner packaging, packing labor, and export cartons. Ask what happens if the artwork changes after proofing. In my experience, logo packaging wholesale becomes expensive not because the box is costly, but because the buyer didn’t ask one annoying question early enough. The annoying question is the saving question. Sorry, that’s just the job. If the factory is in Hangzhou and the warehouse is in Atlanta, GA, you also want to know whether the cartons ship flat or assembled. That can change pallet count and freight by a lot.

There is also freight. A lightweight carton order can look cheap until the shipping pallet doubles the final landed cost. If your supplier is on the other side of the ocean and your warehouse only accepts palletized delivery, build that into the quote from day one. I would rather see a buyer spend five minutes on freight assumptions than spend five weeks cleaning up a receiving problem. Nobody needs that kind of excitement. On a 6,000-unit order out of Ningbo, the freight line item was $430 for factory-to-port trucking and $1,260 for ocean freight to Oakland, CA. That was the real landed cost, not the pretty unit price on page one.

How the Logo Packaging Wholesale Process Works From File to Freight

The process should be simple, even if the details are not. A clean logo packaging wholesale order usually follows this sequence: quote request, dieline confirmation, artwork prep, sampling, approval, production, quality control, packing, and delivery. If any step is skipped, someone ends up redoing work. Usually the buyer. Sometimes the factory. Either way, money moves. When everything is organized, a standard run in Shanghai or Dongguan can move from files to finished cartons in about 12 to 15 business days after proof approval.

Here is the normal timeline I see for logo packaging wholesale projects with standard materials and no drama:

1. Quote request: 1 to 2 business days if dimensions and quantity are clear.
2. Dieline confirmation: 1 to 3 business days for standard boxes, longer for custom structures.
3. Artwork prep and proofing: 2 to 5 business days depending on revisions.
4. Sampling: 3 to 7 business days for digital samples, 5 to 12 for structural prototypes.
5. Production: 10 to 25 business days after approval.
6. QA and packing: 1 to 3 business days.
7. Freight: depends on route, usually 3 to 35 days depending on air or sea.

Where does delay happen? Artwork. Always artwork. A buyer sends a low-resolution PNG, the logo gets fuzzy, then the designer disappears for two days, and suddenly the shipping date slips. I have also seen delays from people approving a sample without checking the fold lines. Later, they discover the barcode sits too close to the seam, and production has to stop. That is why logo packaging wholesale buyers need a clear approval process internally before they send files to the factory. A 300 dpi print file is not enough if the dieline is wrong by 1.5mm.

Speeding things up is not hard. Send vector artwork in AI, EPS, or PDF format. Confirm box dimensions early. Decide on finish before sampling. Approve proofs fast. One apparel brand I worked with moved from initial quote to full production in 16 business days because they had their dimensions, logo files, and Pantone values ready before we even asked. That is how you do logo packaging wholesale without drama. Their cartons were printed in Foshan, shipped to a warehouse in Richmond, VA, and the launch still hit the shelf date.

Quality control should not be some mystery ritual. At minimum, I want material inspection, print proofing, die-cut alignment checks, and final carton counts. On larger runs, I also want drop-test or compression-test documentation if the box is shipping through rough distribution channels. If the supplier can’t explain their QA process, I get suspicious. If they can explain it too fast, I get more suspicious. Real factories have checkpoints, not slogans. In one plant near Shenzhen, I watched them sample-check every 200th carton on a 20,000-piece run. That is the kind of boring detail that saves money later.

Communication is the cheap insurance policy here. I have sat in supplier meetings where one missing phrase in the spec—“with insert” versus “without insert”—changed the whole production line. That kind of mistake is avoidable when the buyer and factory confirm details in writing. Logo packaging wholesale works best when everybody is reading the same file, not interpreting a vague email from someone in a hurry. If your team is split across New York, NY and San Diego, CA, one spec sheet is better than five opinions.

For brands that rely on wholesale programs and repeat ordering, the cleanest path is often to build one master spec sheet, one approved dieline, and one photo reference pack. That way, every reorder matches. If you need help organizing that process, our Custom Packaging Products page and Wholesale Programs page show the categories and buying options we work with every day. We also keep common carton dimensions and finish references on file so reorders do not start from zero.

Why Choose Custom Logo Things for Logo Packaging Wholesale

I’m not interested in selling packaging with mystery pricing and a smiley face. Custom Logo Things exists to make logo packaging wholesale practical. That means clear quotes, straightforward material guidance, and real supplier coordination instead of hand-wavy promises. We work with custom sizing, finish options, and packaging design decisions that support the product instead of fighting it. If your order is 2,500 folding cartons with a matte aqueous finish, we say that. If your rigid box needs 3mm greyboard and a magnet closure, we say that too.

My background is in custom printing, and I have spent enough time negotiating with suppliers to know where costs hide. A better board grade here. A longer lead time there. A tooling change nobody mentioned until the sample stage. I’ve had factories in Shenzhen quote one number on Monday and another on Thursday because a finish required a different production line. That’s normal. What matters is whether somebody explains it honestly. We do. Sometimes bluntly. Saves everyone time. I once caught a supplier trying to swap 300gsm board for 250gsm on a 4,000-unit run in Wenzhou. Cute. Not happening.

For buyers who want logo packaging wholesale that ships on time, the real value is specification control. We help identify whether SBS, kraft, corrugated, or rigid board fits the job. We look at the shipping method. We look at print complexity. We look at whether a short-run digital order makes more sense than a larger offset buy. That kind of guidance can save $400 on the front end and $4,000 in cleanup later. If your cartons need to move through a fulfillment center in Indianapolis, IN, we build that into the structure and the freight plan.

We also push back when a finish is unnecessary. I know that sounds weird for a packaging seller, but I would rather lose a fancy add-on than see a buyer blow budget on a foil stamp that no one notices under retail lighting. Honest service beats flashy talk. Every time. Especially in logo packaging wholesale, where the wrong choice can turn a clean launch into a production mess. I have watched people fall in love with foil for all the wrong reasons. It happens. On one retail roll-out in Miami, FL, the buyer wanted foil on every panel. We cut it to the front logo only and saved $0.22 per unit across 7,500 boxes.

“We needed 8,000 boxes, not a story. Sarah’s team gave us the spec sheet, the sample timeline, and the landed cost in one quote. That saved our launch.”

That kind of feedback is why clients come back. Not because everything is perfect. Because the numbers are clear, the revisions are controlled, and nobody pretends a 1,000-piece premium rigid order should cost the same as a 10,000-piece folding carton run. Logo packaging wholesale works when the supplier respects math and the buyer respects process. Fancy talk doesn’t load a pallet. A 20-pallet shipment from Qingdao to a warehouse in Columbus, OH does not care about buzzwords. It cares about accurate specs.

Next Steps to Order Logo Packaging Wholesale Without Wasting Time

If you want a serious quote for logo packaging wholesale, gather the basic information first. Dimensions. Quantity. Logo files. Finish preferences. Shipping method. Target budget. Deadline. If you have those seven pieces, the quote will be cleaner and the sample stage will move faster. If you have only a logo and a dream, expect questions. Lots of them. Probably from me. I have seen a 5-minute request turn into a 2-day delay because nobody knew whether the box was 6 inches wide or 6 inches deep.

Send this exact information when requesting pricing:

• Box style: mailer, folding carton, rigid box, paper bag, tissue, label, or insert.
• Product dimensions: length, width, height, and product weight.
• Quantity: one-time order and expected repeat volume.
• Artwork files: vector logo, brand colors, and any print references.
• Finish preferences: matte, gloss, soft-touch, foil, emboss, deboss, or spot UV.
• Shipping details: warehouse location, pallet needs, and delivery deadline.
• Budget range: realistic target per unit or total landed budget.

Order a physical sample if color accuracy or structure is critical. I say that even when people want to skip it. A screen mock-up is not enough when the box has a fold, an insert, and a branded lid. A sample can catch a 2mm sizing mistake or a board choice that feels flimsy in hand. For logo packaging wholesale, that sample fee is usually cheaper than a single production error. Cheaper than one angry customer email too, which is always nice. Most physical samples run $45 to $120 depending on structure, and they usually arrive in 3 to 7 business days if the factory is already set up.

When comparing quotes, compare them line by line. Make sure you know whether the price includes setup, plates, sample revisions, inner inserts, packing labor, and freight. A quote that looks $0.08 cheaper per unit can be $300 more expensive once the missing pieces show up. I have seen that happen too many times to call it an accident. I once compared two 6,000-piece quotes from suppliers in Guangzhou and Xiamen, and the “cheaper” one excluded carton inserts and export cartons. Surprise. Not a fun one.

If your brand needs Custom Printed Boxes, retail packaging, or branded packaging that supports a real launch date, then get the details together and request a quote with confidence. The fastest path is usually the simplest one: clean specs, clean files, and a supplier who won’t pretend every order is the same. That is how logo packaging wholesale should work. Not fancy. Not vague. Just correct. If the timeline is 14 business days from proof approval and the budget is $0.27 per unit at 10,000 pieces, say that up front and move on.

If you want packaging that looks good, protects the product, and does not blow up your budget, start with the specs and the numbers. That is the whole point of logo packaging wholesale. Get the details right, get the quote aligned, and move from planning to production without wasting another week on vague vendor talk. If the supplier is in Dongguan, the carton is 350gsm C1S artboard, and the lead time is 12 to 15 business days from proof approval, you are finally speaking the same language as the factory.