Wholesale Cosmetic Packaging Supplies: Buying Guide

When I walk a filling line in Guangzhou and hear a pump squeal, or see lotion creeping under a cap thread, I already know the packaging decision was cheaper only on paper. Wholesale Cosmetic Packaging Supplies should protect margin, protect product, and protect the brand all at once, because a $0.04 savings on the bottle can turn into a $0.40 problem once leaks, rework, and complaints start piling up. That math is rude, but it is real, especially when a 50,000-unit run means just 2% waste becomes 1,000 damaged pieces.

I remember one skincare launch in Shenzhen where the client proudly showed me three separate vendor quotes and said the unit price looked fantastic. The bottles were fine, the caps fit “close enough,” and the pump neck finish was just a hair off; after two weeks of transit testing and store handling, they had enough failures to scrap an entire pallet. Honestly, I think Wholesale Cosmetic Packaging Supplies only make sense when the packaging is treated like part of the formula, not an afterthought. Otherwise, you are basically paying for future stress, usually at the worst possible moment—right before a launch.

For brands in skincare, makeup, haircare, and body care, the right product packaging has to do a lot: look clean on a shelf, survive carton compression at 15–20 kg per case, stay stable with oils or alcohols, and keep the filling room running at a pace that doesn’t choke output. That is why many teams move toward wholesale cosmetic packaging supplies from a manufacturer in Dongguan, Yiwu, or Ningbo rather than piecing together bottles, pumps, droppers, and labels from multiple vendors who do not always share the same spec language. And yes, chasing three vendors for one packaging issue is exactly as annoying as it sounds.

Why wholesale cosmetic packaging supplies matter for margin and brand consistency

On the factory floor, the cheapest-looking package often becomes the most expensive package, because the real cost shows up in breakage, torque failures, print defects, and the hours spent chasing small problems across the line. I remember a body lotion project in Ningbo where the client wanted a glossy jar with a decorative cap; the price looked perfect until we counted hand-sorting, extra QC, and the returns from a retail chain that had seen lids backing off in shipping. That is exactly why wholesale cosmetic packaging supplies are about more than buying in bulk; they are about controlling the hidden costs that can chew through margin. Hidden costs are sneaky like that. They never show up in the first quote, of course.

When a brand buys wholesale cosmetic packaging supplies, it can usually hold color consistency across multiple runs, keep backup inventory for reorder cycles, and avoid the chaos that happens when every component comes from a different source. In practical terms, that means a skincare line can keep the same frosted bottle shade, the same cap finish, and the same label panel dimensions from one production month to the next. For package branding, consistency is not cosmetic; it is part of trust. People notice when a cream jar suddenly looks slightly “off,” even if they cannot explain why, especially on a display table under warm retail lighting at 3,000–4,000K.

Brands in makeup and haircare also need packaging that supports production efficiency. A pump with the wrong output can slow a filler, a jar with a narrow mouth can make filling messy, and a cap with inconsistent thread tolerance can create line stoppages that only show up after the run starts. I’ve seen a small lipstick launch lose an entire afternoon because the closure insertion depth was off by less than a millimeter. Less than a millimeter. That is the kind of detail that makes production managers stare at the ceiling for a second before speaking, usually while the machine is still humming at 60 units a minute.

There is also a real advantage to sourcing from a packaging manufacturer in Guangzhou or Shenzhen instead of mixing suppliers across three different provinces. A manufacturer can coordinate the bottle mold, the closure fit, the decoration method, and the liner type under one quality system. That matters when you need compatibility checks for a serum, a cream, or an alcohol-based mist, because light sensitivity, oxygen exposure, and solvent resistance all behave differently once the formula sits inside the package. I have watched brands save weeks simply by sending one clear spec sheet instead of trying to translate it between three vendors.

“If the packaging does not run cleanly on the filler, it is not a good package, no matter how nice it looks in the render.” That is something a plant manager told me in a Shenzhen facility, and I still use it as a filter when reviewing wholesale cosmetic packaging supplies.

The other piece people miss is shipping damage. Packaging is not just about shelf appeal; it also affects how cartons stack, how closures hold under vibration, and how much product gets written off after transit. A package that survives ISTA-style drop and vibration expectations is worth more than one that photographs well but cracks during distribution. For reference, groups like ISTA and industry organizations such as The Packaging School / PMMI ecosystem help set the mindset for testing, transport, and packaging performance, especially for export shipments moving through Shenzhen Port or Ningbo-Zhoushan.

So yes, price matters. But the best wholesale cosmetic packaging supplies help you preserve margin by reducing waste, limiting returns, and keeping the filling line productive. That is the kind of math that matters on a production floor, not just in a spreadsheet. A 10-cent difference sounds tiny until it hits 100,000 units and becomes a $10,000 swing.

Wholesale cosmetic packaging supplies product types and use cases

Wholesale cosmetic packaging supplies cover a wide range of primary packaging and closure components, and each one fits a different formula, production method, and retail positioning. The main categories I see most often are bottles, jars, tubes, pumps, droppers, airless containers, compacts, and closures. A brand can build a whole skincare line from those parts, but the right choice depends on viscosity, sensitivity, dispensing behavior, and the look you want on shelf. I say “look you want on shelf” because that decision is never only technical, even when people pretend it is.

Bottles are common for toners, serums, cleansers, and body lotions. PET and HDPE bottles are popular because they are lightweight, cost-effective, and easy to decorate with silk screen printing or labels. In bulk, a 100 mL PET toner bottle can sit around $0.18–$0.32 per unit at 10,000 pieces, while glass often starts closer to $0.55 per unit before decoration. Glass bottles are often chosen for higher-end serums or fragrance-heavy formulas, especially when the brand wants a premium feel and stronger barrier properties. I’ve seen glass deliver a stronger retail impression, but I’ve also seen it increase freight costs by 18% and breakage rates when the secondary packaging was too light. Pretty and expensive can be friends, but they are not always best friends.

Jars are the natural fit for creams, balms, masks, and thicker body care products. PP jars are durable and inexpensive, acrylic jars bring more visual impact, and glass jars can elevate a luxury line if the product and distribution channel justify the extra cost. Tubes work well for hand creams, cleansers, sunscreens, and travel-size cosmetics, especially where portability and clean dispensing matter. For wholesale cosmetic packaging supplies, tubes often win when hygiene and squeeze control are priorities, particularly for 30 g to 150 g formats sold through e-commerce and pharmacy channels.

Pumps and droppers are functional choices as much as visual ones. A lotion pump needs a stable output per stroke, often in the range of 0.8cc to 2.0cc depending on the formula, while a dropper package is better for controlled application of serums, facial oils, or concentrated actives. Airless bottles are especially useful for sensitive formulas, because they reduce exposure to oxygen and help protect ingredients that can oxidize or discolor. That is one reason premium skincare brands keep asking for wholesale cosmetic packaging supplies built around airless systems. They want the product to behave well, not just photograph well, and a 15 mL airless bottle can often justify its $1.10–$2.40 unit price when the formula contains retinol or vitamin C.

Compacts matter for makeup, pressed powders, and cream color cosmetics. They can be made with PP, ABS, or mixed-material structures depending on the finish and target price point. Closures, meanwhile, are rarely “just caps.” A closure includes the liner, thread engagement, torque range, and sometimes tamper evidence, all of which affect how the package behaves in production and transit. A 24/410 cap that looks correct on screen can still fail if the liner thickness is 1.0 mm instead of 1.5 mm, and that is the sort of error that turns into a warehouse headache in under a week.

Material choice matters too. PET is clear and stable for many cosmetic applications. PP handles heat and flex well, making it common for jars, caps, and some pump components. HDPE is slightly opaque and strong, often used for squeeze bottles and dispensers. Aluminum adds barrier and a premium feel, while paper-based components can support eco-focused branded packaging programs when the design and product type permit it. Glass is elegant, but it needs careful carton design and stronger shipping protection. Acrylic looks polished, but it can scratch, and that needs to be disclosed early when discussing wholesale cosmetic packaging supplies—especially for retail environments in hot, high-touch stores in Bangkok, Singapore, or Shanghai.

Customization can be done in several ways. Silk screen printing remains one of the most common methods because it is durable and looks clean on curved bottles. Hot stamping gives a metallic accent, UV coating can improve gloss or tactile contrast, spray finishes create frosted or matte effects, and labeling is still useful when a brand wants flexibility or lower startup cost. Molded-in color can work well for larger runs, but it needs clear Pantone targets and realistic expectations for batch variation. A matte white spray on a 120 mL bottle may add $0.06–$0.12 per unit, while a two-color screen print might add $0.03–$0.08 depending on volume.

Here is a simple comparison I often use with clients deciding between common wholesale cosmetic packaging supplies options:

Package Type	Best Use	Common Material	Typical Price Range	Notes
Pump bottle	Lotion, cleanser, body care	PET, HDPE	$0.42–$1.10/unit at 5,000 pcs	Check output rate and neck finish
Airless bottle	Serums, sensitive formulas	PP, AS, PETG	$0.85–$2.40/unit at 5,000 pcs	Better for oxygen-sensitive actives
Cosmetic jar	Creams, balms, masks	PP, acrylic, glass	$0.20–$1.35/unit at 5,000 pcs	Verify liner and thread fit
Tube	Hand cream, sunscreen, cleanser	PE, laminated tube	$0.16–$0.75/unit at 5,000 pcs	Great for squeeze control and travel
Dropper bottle	Serums, facial oils	Glass, PET, amber glass	$0.55–$1.80/unit at 5,000 pcs	Match bulb, pipette, and neck size carefully

Compatibility should always be part of the conversation. Neck finishes, liner types, dispensing rates, and formula sensitivity to light, oxygen, or solvents can make or break a launch. I once watched a fragrance-heavy serum attack the wrong liner material within days during storage testing, which forced a full packaging change before production. That is not unusual, and it is exactly why wholesale cosmetic packaging supplies should be selected with formula data in hand, not just a visual mockup. Packaging does not care about your deadline; it only cares about chemistry.

What should you verify before ordering wholesale cosmetic packaging supplies?

The quickest way to avoid trouble with wholesale cosmetic packaging supplies is to verify the technical specs before money changes hands. That starts with capacity, diameter, neck size, wall thickness, tolerance range, closure type, and fill compatibility. A bottle that looks right on a product page can still be wrong for your filler if the neck finish is mismatched by even a small amount. In a real production room, small dimensional differences become very visible, very fast. There is no polite way for the line to handle a bad spec, especially when a 24/410 neck was expected but a 24/415 sample arrives from a factory in Hangzhou.

Closure fit and torque testing matter because leaks do not only happen during shipping. They also show up on the store shelf when products are handled repeatedly, tipped in a warehouse, or packed into retail cartons under pressure. I have seen one batch of jars fail because the closure thread profile was loose enough to pass a quick hand test but not tight enough to survive vibration. For wholesale cosmetic packaging supplies, a proper torque range and seal check should be part of the approval process. Otherwise, you are just hoping, which is not a plan. A practical target might be 10–15 in-lbs for certain caps, but the exact range depends on the package design.

Decoration specs deserve the same attention. Print area, Pantone matching, minimum line thickness, and artwork file requirements all affect the final appearance. If your logo has a fine serif line or a small icon, the factory needs that information early so the print screen, hot stamp die, or label layout can be set up correctly. I always ask for vector files, not flattened images, and I prefer clear brand standards with approved color references. That makes package branding more reliable across future runs. It also saves everyone from the “why is the logo blue now?” conversation, which is never fun, especially after a reprint has already cost another $1,200.

Factories usually run quality control in stages. Incoming material inspection checks resin, glass, closures, and decoration inputs before production begins. In-process checks look at dimensions, print registration, and surface finish while the line is still active. Final AQL sampling catches issues like scratches, off-color decoration, broken components, or inconsistent assembly before the shipment leaves the plant. A proper supplier of wholesale cosmetic packaging supplies should be able to explain its QC checkpoints without sounding rehearsed. If they say “we check everything,” ask for the AQL level, sample size, and defect categories.

Compliance and documentation also matter. Depending on the package and market, you may need MSDS or SDS information, cosmetic-grade or food-grade declarations where relevant, and transit testing results like drop tests or vibration tests. If you are shipping into channels with stricter requirements, ask for documentation on material composition and any applicable EPA-related or environmental claims carefully, especially if recycled content or sustainability statements are part of the brief. I’m careful here because not every “eco” label means the same thing across regions, and I have seen more than one brand get burned by vague green claims in the UK, the EU, and Southeast Asia.

Here is a practical checklist I use before approving wholesale cosmetic packaging supplies for production:

• Capacity: confirm the fill volume in mL and the working headspace.
• Neck finish: verify the thread standard and closure compatibility.
• Wall thickness: check for durability, feel, and shipping resistance.
• Tolerance: confirm acceptable variation for mass production.
• Decoration: approve print position, color targets, and finish type.
• Seal: test liners, pumps, and tamper features against the formula.
• Carton fit: confirm the package works with your secondary packaging and custom printed boxes.

The best suppliers of wholesale cosmetic packaging supplies will not just hand over a spec sheet; they will ask about your filling equipment, your shipping method, and whether the package needs to survive retail displays, e-commerce mailers, or palletized freight. That extra conversation saves money later. I’ve seen brands skip it and then spend more fixing the problem than the entire first order would have cost if they had asked the right questions up front. Frustrating? Absolutely. Preventable? Also absolutely.

Wholesale cosmetic packaging supplies pricing, MOQ, and cost drivers

Pricing for wholesale cosmetic packaging supplies is driven by a handful of factors that are easy to understand once you have stood beside a decorating line or a molding machine in Dongguan. Material choice comes first. PET bottles, PP jars, and HDPE squeeze tubes sit in a different cost band than glass, aluminum, or multi-layer structures. Decoration complexity comes next, because each added step—screen print, hot stamp, spray finish, matte coating, metalized accent—adds labor, setup, and sometimes reject risk.

Tooling is another major driver. A stock bottle with a stock closure may be economical from the first carton. A fully custom mold, on the other hand, can require a larger upfront commitment, especially if the customer wants a unique silhouette, embossed branding, or a nonstandard neck finish. I have sat through enough supplier negotiations to know that the mold quote is only part of the story; maintenance, lead time, sample revisions, and any tool modification costs should all be understood before signing off on wholesale cosmetic packaging supplies. A custom mold can range from $2,500 to $18,000 depending on complexity and cavity count.

MOQ changes based on the level of customization. Stock items often allow lower quantities, semi-custom items usually sit in the middle, and fully custom packaging may require a higher minimum to justify tooling and setup. That is why one client can order 3,000 jars from stock while another needs 15,000 units to support a custom cap color and printed body. Always ask for MOQ by component, not just by total program, because bottles, closures, and pumps can each have different thresholds. A 5,000-piece bottle order may be easy, while the matching pump could require 10,000 pieces to match factory setup.

Simple labeling is usually the most economical decoration path, especially for fast launches or market tests. Molded-in color can be cost-effective at volume, but only if the color target is stable and the production run is large enough to absorb setup. Multi-step printing, metallic finishes, and custom molds raise the unit cost, though they may also create stronger retail packaging presence and better brand recall. The right answer depends on channel, margin, and how much visual differentiation the product needs. I’m biased toward clarity here: if the packaging is going to sit next to ten similar bottles in a Seoul beauty aisle, a tiny savings on decoration might not be worth much.

Here is how I explain landed cost to clients buying wholesale cosmetic packaging supplies:

1. Unit price: the factory price per component or assembled set.
2. Decoration: printing, stamping, coating, or labeling charges.
3. Tooling: mold fees, die costs, or special setup charges.
4. Freight: ocean, air, domestic trucking, and port fees.
5. Storage: warehouse space for cartons and buffer stock.
6. Waste allowance: a realistic percentage for breakage or QC rejects.

In a clean budgeting model, all of those pieces belong in the same sheet. I have seen brands get excited about a $0.23 jar only to discover the landed cost was much higher once freight, inspection, and inserts were added. For wholesale cosmetic packaging supplies, consolidating multiple SKUs into one production run can help reduce overhead because it makes color matching, freight booking, and QC more efficient. That does not mean every SKU should be forced together, because shared runs can also increase risk if the specs are not aligned. The answer depends on the product family and whether you are ordering 8,000 units or 80,000.

If you are comparing suppliers, ask for a line-item quote. A serious quote for wholesale cosmetic packaging supplies should identify the package type, decoration method, quantity, lead time estimate, and any assumptions about packaging inserts or secondary cartons. If a quote looks too simple, I usually assume something is missing. That habit has saved me from more than one unpleasant surprise, especially when a “cheap” quote quietly excluded freight to Los Angeles or Rotterdam.

For brands trying to balance cost and presentation, a good approach is to use stock packaging for lower-volume SKUs and reserve custom branding for hero products. That way you can keep the line moving while still building a stronger visual story where it matters most. It is the same logic many teams use with Custom Packaging Products and Wholesale Programs: match the investment to the product’s role in the catalog. A hero serum in a frosted airless bottle can carry more design spend than a refill SKU in a plain HDPE container.

How does the wholesale cosmetic packaging supplies order process work?

The order process for wholesale cosmetic packaging supplies usually starts with an inquiry, but a strong inquiry is more than “send me pricing.” The factory needs specification review, target quantity, desired decoration, formula notes, and the launch timing. Once those basics are clear, the supplier can issue a quote that reflects actual production conditions instead of guesswork. That small bit of prep saves everyone from the usual ping-pong of emails that somehow turns one question into six.

From there, sampling begins. Stock samples are used when you want to assess basic size, feel, and closure fit. Pre-production samples are more formal and often reflect the intended decoration, color, or assembly. Color-approved samples matter when brand consistency is critical, because that is your reference point for future runs of wholesale cosmetic packaging supplies. I always recommend saving an approved physical sample with the project file; paper specs alone are not enough when you need to settle a dispute later. A good supplier in Guangdong or Zhejiang should be able to ship samples in 3–7 business days for stock items.

Delays usually come from artwork revisions, mold changes, color matching, or third-party testing. One haircare client I worked with changed their label panel size three times after packaging approval because the marketing team kept adjusting the ingredient story. That pushed their production slot back by almost two weeks, and the packaging sat waiting while the formula was ready. It was an expensive lesson, and it could have been avoided with locked artwork before release. Marketing moves fast, sure, but packaging does not magically forgive indecision.

Timing depends on whether the order is stock or custom. Stock wholesale cosmetic packaging supplies may move in a relatively short window if inventory is available, while custom projects require more time for sample approval, tooling, printing setup, and production. I prefer to give clients a timing range rather than a promise I cannot control, because real factory schedules are affected by line load, material availability, and inspection outcomes. A realistic plan protects everyone. For custom runs, production is typically 12–15 business days from proof approval, while decorated orders with new tooling often need 20–30 business days before packing.

Freight and customs need to be part of the timeline too. Ocean shipping can add 18–35 days depending on destination, customs clearance can vary by port, and domestic delivery can be slowed by warehouse congestion. If a launch date is fixed, buffer stock should be built into the plan so the brand is not waiting on the last truck. In my experience, the best wholesale cosmetic packaging supplies orders are the ones that assume a little friction and still arrive on time, whether they ship into Long Beach, Felixstowe, or Jebel Ali.

Here is the workflow I recommend:

1. Submit the product brief and target quantity.
2. Review specifications and confirm material choice.
3. Request quote and MOQ details.
4. Approve stock sample or pre-production sample.
5. Finalize artwork, Pantone targets, and print placement.
6. Lock the production slot and plan freight.
7. Approve final QC documentation before shipment.

This process works whether you are buying wholesale cosmetic packaging supplies for a single launch or building a recurring program for multiple SKUs. The more complete the brief, the fewer surprises later. That is true in every plant I’ve ever walked, from a small workshop in Yiwu to a larger export line in Dongguan.

Why choose Custom Logo Things for wholesale cosmetic packaging supplies

Custom Logo Things stands out because the conversation is not being handled by someone who has only seen packaging in a catalog. The team understands factory-floor realities, and that matters when you are trying to source wholesale cosmetic packaging supplies that must actually run on production equipment, survive transport, and deliver a consistent brand look from carton to shelf. Experience with decoration, assembly, and material sourcing changes the quality of the advice you get. It changes the questions they ask, too, which is usually the tell. A rep who knows the difference between a cosmetic pump and an airless actuator is already saving you time.

Working directly with a manufacturer also gives you better control over material sourcing, decoration, and sampling. If the project needs a PET bottle with a matte spray finish, a PP cap with a specific liner, and a logo printed in two colors, those details can be coordinated under one production plan instead of passed from vendor to vendor. That is a major advantage when the line has to stay aligned across bottle, closure, and print processes. With wholesale cosmetic packaging supplies, coordination is often the difference between a smooth run and a messy one, especially when the production floor is handling 20,000 units in a single shift.

I’ve been in supplier meetings where the customer brought three matching samples from different sources and wondered why the shade difference looked small in the office but huge on the shelf. The answer was simple: different resin batches, different decoration methods, different cure behavior. A manufacturer who controls more of the process can keep that variation tighter. That kind of consistency is exactly what branded packaging needs when the product line is expected to look unified across multiple SKUs, from the first 5,000 units to the next reorder six weeks later.

Another practical benefit is troubleshooting. If a pump output is too low for a lotion, or a label starts lifting because the surface energy is wrong for the adhesive, a manufacturer can address the problem with real production knowledge rather than general advice. I have seen formula viscosity, cap design, and liner material interact in ways that only show up after filling, and that is where the value of an experienced supplier becomes obvious. Good wholesale cosmetic packaging supplies should be selected with those interactions in mind, not guessed at over email.

Custom Logo Things also helps with clear specifications and responsive quoting. That matters because cosmetic teams do not need vague promises; they need a component that meets the target fill volume, decoration style, and shipping method at a price they can build into the margin plan. If the product category is skincare, makeup, haircare, or body care, the recommendation should reflect the use case rather than a one-size-fits-all pitch. That is the kind of practical support I respect, especially when a quote comes back with actual material callouts like 350gsm C1S artboard for the carton insert or PETG for a clear bottle body.

For clients building full retail packaging programs, the ability to align primary packaging with custom printed boxes and secondary cartons is especially useful. A bottle that fits its carton correctly and prints cleanly on the body creates a much stronger visual impression than a package assembled from disconnected parts. And when the same team can discuss product packaging, package branding, and shipping durability in one conversation, the project usually moves faster and with fewer surprises. That matters whether you are launching in Dubai, Manchester, or Toronto.

That is why I am comfortable recommending Custom Logo Things for wholesale cosmetic packaging supplies. The value is not hype. It is practical manufacturing knowledge, clear communication, and packaging advice that respects both the formula and the filling line.

How to place the right wholesale cosmetic packaging order

If you want the right wholesale cosmetic packaging supplies order, start by preparing the facts that matter to production. Buyers should have the product type, fill volume, material preference, decoration method, target quantity, and launch date ready before requesting a quote. That single step cuts down on back-and-forth and helps the supplier understand whether the job is a stock buy, a semi-custom run, or a fully custom project. A solid brief can save 2–3 email cycles, which sounds minor until you are trying to hold a ship date.

Formula notes should go out early. Share viscosity, alcohol content, fragrance load, and any ingredient sensitivity to light or oxygen. If you already have samples or reference packaging, send photos and, if possible, physical examples. That gives the packaging team a much clearer sense of the end goal. In my experience, the best wholesale cosmetic packaging supplies orders are the ones where the brand treats the package like part of the product brief, not a last-minute accessory. A serum in a 30 mL amber glass dropper bottle needs different thinking than a 200 mL HDPE lotion bottle, and the factory should know that from the start.

When comparing quotes, do not stop at the unit price. Check tooling fees, packaging inserts, freight assumptions, QC expectations, and defect allowances. A lower quote can easily become more expensive if the supplier excluded the exact decoration you need or assumed a different shipping method. I’ve seen buyers save a few cents on unit price and spend far more later correcting the mistake. That is why a disciplined quote review matters. I wish I could say people only learn that lesson once, but no. I have watched the same brand repeat it in two separate product cycles.

Here is the action plan I recommend:

1. Request a quote for the exact package type and quantity.
2. Confirm specs, decoration, and compatibility details.
3. Review stock or pre-production samples.
4. Approve artwork with Pantone and print placement confirmed.
5. Lock the production slot and shipping window.
6. Verify the order against the formula, filler, and freight method before release.

That final verification step matters more than many teams realize. A package can look perfect on a screen and still fail in the real world if the cap torque is off, the liner is wrong, or the carton insert creates pressure points. Before you place the order, make sure the wholesale cosmetic packaging supplies are matched to the formula, the filling equipment, and the shipping method, because that is what keeps the launch from slipping. If possible, ask for a pre-shipment photo set and carton count confirmation before the cargo leaves Shenzhen or Ningbo.

If you are building a new line, expanding an existing one, or replacing a problem package, choose the path that supports both the brand and the production floor. That usually means asking better questions, reviewing real samples, and buying from a supplier who understands the work. For Custom Logo Things, that is the whole point of wholesale cosmetic packaging supplies: give brands packaging that looks right, runs right, and keeps the numbers under control.